Home WINDOWS HOW-TO This app cannot be activated by the built-in administrator.

This app cannot be activated by the built-in administrator.

0
This app cannot be activated by the built-in administrator.

[ad_1]

You may receive an error message This app can’t be activated by the Built-in Administrator when you are trying to open certain applications on a Windows 11 or Windows 10. This post presents the most adequate solutions that affected PC users can apply to resolve the issue on their device. In some cases, the error occurs when trying to open PNG, GIF, JPEG and PDF files.

When you run into this problem, depending on the program in question, you will receive a complete error message in the following lines;

Microsoft Visual Studio

Failed to activate Windows Store app. Activation request failed with error: “This application cannot be activated by the built-in administrator.”

See Help for troubleshooting advice.

This app cannot be activated by the built-in administrator.

If you encounter this problem, you can try our recommended solutions below in no particular order and see if it helps. This app cannot be activated by the built-in administrator. an issue on your Windows 11/10 device.

  1. Run Windows Store Apps Troubleshooter
  2. Run System File Checker (SFC)
  3. Reset Microsoft Store or clear Windows Store cache
  4. Change UAC Level
  5. Modify User Account Control Policy Using Group Policy Editor

Let’s take a look at a description of the process associated with each of the listed solutions.

Before trying the solutions below, check for updates and install all available bits on your Windows 11/10 computer and see if the error appears again when starting the application. On the other hand, if the error started showing up after a recent Windows update, you can uninstall that update. Also make sure you are using an administrator account. You can change the default account to an administrator account, or simply create a new account with administrator rights. If you want, you can create a local administrator account on your PC.

1]Run Windows Store Apps Troubleshooter

Since the app in question is a Microsoft Store app, you can start troubleshooting to troubleshoot This app cannot be activated by the built-in administrator. an issue on your Windows 11/10 device by running the Windows Store Apps troubleshooter and see if that helps.

To run the Windows Store Apps troubleshooter on a Windows 11 device, follow these steps:

  • Click on Windows key + I to open the Settings app.
  • Switch to System > Troubleshoot > Other troubleshooters
  • Under Other, find Windows Store Apps
  • Click on Run
  • Follow the instructions on the screen and apply any recommended fixes.

To run the Windows Store Apps troubleshooter on your Windows 10 PC, follow these steps:

Windows Store Apps Troubleshooter-10

  • Click on Windows key + I to open the Settings app.
  • Go to Update and Security.
  • Click the icon Troubleshooter tab.
  • Scroll down and tap Windows Store Apps.
  • Click the icon Run the troubleshooter button.
  • Follow the instructions on the screen and apply any recommended fixes.

If that doesn’t work, you can uninstall and reinstall the corresponding Windows Store app.

2]Run System File Checker (SFC).

Run System File Checker (SFC)

This solution requires you to run an SFC scan on your Windows 11/10 PC and see if that helps. The native utility will repair any corrupted system file that is likely the culprit in the problem.

3]Reset Microsoft Store or clear Windows Store cache

Clear Windows Store cache

Some affected users reported that they were able to resolve their issue by resetting the Microsoft Store or clearing the Windows Store cache. So, you can try this and see if it works for you, otherwise try the next solution.

4]Change UAC level

Change UAC level

Due to security settings in newer versions of Windows, certain types of files that are opened through Store apps require UAC (User Account Control) permissions, but since the built-in account does not have UAC rights, you will get an error. In this case, you can change the UAC level on your Windows 11/10 PC to fix the problem.

Try the next solution if it doesn’t work for you.

5]Modify the User Account Control policy using the Group Policy Editor.

Change User Account Control Policy

This is a two-step solution that requires you to enable admin approval mode for the built-in admin account and then change User Interface Privilege Isolation (UIPI) the value of the registry key.

Do the following:

  • Click on Windows key + R to open the Run dialog box.
  • In the Run dialog box, enter gpedit.msc and press Enter to open the Group Policy Editor.
  • In the Local Group Policy Editor, use the left pane to follow the path given below:

Computer Configuration> Windows Settings> Security Options> Local Policy> Security Options

  • Scroll the right pane, find and double click User Account Control: Admin Approval Mode for the Built-in Administrator account policy for editing its properties.
  • In the policy window, set the switch to Enabled
  • Click on Apply > OK to save your changes.
  • Close the Group Policy Editor.

For Windows 11/10 Home users, you can add the Local Group Policy Editor feature and then follow the instructions as above.

You can now proceed step 2 to change the value of the UIPI registry key.

Change UIPI Registry Key

Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as a necessary precaution. After that, you can proceed as follows:

ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystemUIPI
  • In a location in the right pane, double-click (Default) to edit its properties.
  • In the properties dialog, enter 0x00000001 (1) v Vcurrent data field.
  • Click on OK or press Enter to save your changes.
  • Close Registry Editor.
  • Reboot your computer.

Hope this helps!

How do I enable the built-in administrator account?

To enable the built-in Administrator account on Windows 11/10 PC, follow these instructions:

  • Open a command prompt in elevated mode.
  • Type net user administrator / active: yes and then press Enter.
  • Wait for confirmation.
  • Restart your computer and you should be able to log in with an administrator account.

What is the built-in administrator account?

The built-in administrator account for the Windows operating system (OS) is the first account created when the operating system was installed. You can also remove the built-in Administrator account in Windows.

[ad_2]

Source link

windows789.com

LEAVE A REPLY

Please enter your comment!
Please enter your name here