Okay, whether you’re using a desktop computer or a laptop, then knowing the components within your PC and knowledge about your OS will benefit you in many ways. For example, you need to know which RAM your motherboard supports, if you want to add more RAM. Likewise you need to see if you are using a 32bit or 64bit operating system when downloading software.

 

Having proper inside your PC knowledge of the components can also help you to solve various problems. So it’s an important thing to know the full specification of your PC. You do not need software from a third party to test the full functionality of your PC.

Check Your PC’s full Specifications on Windows10

You can easily review the device specs on Windows 10 including Basic Input / Output Configuration, Firmware, Model Number, Cpu , Memory, Drive, Graphics and more. Within this post, we will share a few methods that will help you find out the full list of hardware and software requirements for your computer.

1. Check Processor, RAM, Display ID & Windows Version

The Windows 10 device settings page provides you with basic information about specifications such as Cpu , RAM and current version. Check Processor, RAM, System ID & Windows Edition, here.

 

Stage 1 . Start Click the Start button first and then pick ‘Settings.’

Stage 2 . You need to press ‘Program’ on the Settings tab

Stage 3 . Under the System, click on ‘About’

Stage 4 . Under the About section, check the ‘Device Specifications’ and ‘Windows Specifications’

 That’s it, you are done! Under the device specifications, you can check the device name, processor, RAM, etc. The Windows specification section shows the current version of your Windows operating system.

2. Check the Graphic Card (GPU)

 If you’re looking for ways to test the specifications of the Graphics Card, then you’ll need to try this process. Here’s how to find out the specifics of the graphics in Windows 10 OS.

Stage 1 . Start Next, right-click the ‘This PC’ button.

            Stage 2 . Click now on ‘Properties’

Stage 3 . Start. Now click on ‘ Device Manager’ on the Program tab

Stage 4 . There you need to find the ‘Display Adapters’ and extend. Your GPU’s listed there.

This is it! You done. So, in Windows 10 machine, you can search the graphic 

3. Check the Motherboard

Ok, you don’t need to open your PC chassis to test which motherboard you’ve got. To test which motherboard your PC uses you must follow some of the simple steps given below.

 

Stage 1 . Start Next, open the search bar for Windows and type in ‘Configuration Data’

Stage 2 . Open and scroll down the System Information until you find the ‘Motherboard Manufacturer’ or ‘BaseBoard Manufacturer’

Step 3 . The manufacturer of the Baseboard shows the Motherboard company and the Baseboard Model shows the model number.

This is it, you ‘re done! This is how on Windows 10 computer, you can test your Motherboard supplier and model number.

4.Check System Information using Command Prompt

Well, if you don’t want to follow the above methods, then you can use the Windows command prompt to check information about the system. Let’s find out how device details can be tested on Windows 10 using Command Prompt.

 

Stage 1: Step 1. First of all, right-click the Start button and select ‘Admin (Command Prompt)’

Stage 2. Type ‘systeminfo’ in the command prompt, and press the Enter button.

Step 3. Now you will be able to see the system information. For more information, you need to type in ‘systeminfo /?’

This is it, you ‘re done! This will allow you to view your computer in more detail.

 

These are the four best ways to check the full specifications of your PC under Windows 10. I hope you enjoyed this post! Tell your friends about it too.

By Mr.B

Leave a Reply

Your email address will not be published. Required fields are marked *