Home WINDOWS HOW-TO SD card not formatting in Windows 11/10 [Fixed]

SD card not formatting in Windows 11/10 [Fixed]

0
SD card not formatting in Windows 11/10 [Fixed]

[ad_1]

If you cannot format your SD card on Windows 11/10 PC, this post is sure to help you. SD cards are used to store additional information. You can now format the SD card to clear all data from it. However, some users have reported that they had an issue whereby their SD card simply won’t format. If you are one of those users who are facing the same problems, this post is for you. In this post, we’re going to mention some working fixes to help you format your SD card.

Before talking about working fixes, let’s discuss the scenarios that prevent the SD card from being formatted.

Why can’t I format my SD card?

This problem can be caused by various reasons. Here are the most common reasons why an SD card cannot be formatted:

  • In general, you are most likely to run into this problem if your SD card has write protection enabled. So, make sure your SD card is write protected in order to be able to format the SD card successfully.
  • It is also possible that your SD card has bad sectors that prevent the SD card from formatting. If the scenario is applicable, repartitioning the SD card should help you fix the problem.

How to fix SD card not formatting?

To fix SD card not formatting, please make sure the SD card is write protected. Alternatively, you can try formatting your SD card through the command line interface, disk management tool, or third-party SD card formatting software. If these methods did not fix the problem, you can try repartitioning the SD card using DiskPart.

SD card won’t format on Windows computer

Here are the methods you can try when the SD card won’t format:

  1. Remove the write protection on the SD card.
  2. Format your SD card using command line.
  3. Format your SD card using disk management.
  4. Re-partition your SD card with DiskPart.
  5. Use a third party tool to format your SD cards.

1]Remove write protection on SD card

The first thing you should do is try to remove the write protection on the SD card to fix this problem. The problem is most likely caused if your SD card has write protection enabled, which prevents any changes to the SD card. So, if the scenario is applicable, removing the write protection on the SD card will fix the problem.

If you are using a card reader, remove the card and then check to see if there is a padlock on the side. If so, make sure it’s not turned on. If the card does not have a lock switch, you can use the Windows built-in DiskPart utility to disable write protection on the SD card. Here’s how to do it:

First, open the Run dialog box with the Windows key + R keyboard shortcut.

Now enter diskpart in the Open box and press Enter. This will open Diskpart on the command line.

Then enter the following command to display a list of active drives:

list disk

Then enter the following command, where X is the disk number:

select disk X

Then write the following command to remove write protection:

attributes disk clear read-only

Finally, hit the Enter button, and when the process is complete, close the Command Prompt.

See if you can now format your SD card or not. If not, you can try the next possible fix to resolve the issue.

2]Format SD card using command line

If you cannot format your SD card in the usual way, you can try formatting it using the command line. Here are the steps to do this:

First, open a command prompt as administrator.

Now enter the following commands into CMD one by one:

diskpart
list disk

Then select the disk number of your SD using the following command:

select disk X

In the above command, X is the SD drive number.

After that enter the following command:

format fs=ntfs quick

This should format your SD card.

If you still can’t format your SD card, move on to the next potential fix to fix the issue.

See: An unknown error occurred while copying a file or folder.

3]Format SD card using disk management

Disk Management is a Windows built-in utility for managing disks and partitions. You can also use it to format your SD card. Here are the steps to format SD card using Disk Management on Windows PC:

  1. First, open the Disk Management tool using the search function on the taskbar.
  2. Now select the partition on the SD card that you want to format.
  3. Then right-click the section and select the Format option.
  4. Then manually enter the volume label, file system and allocation unit size and click OK.
  5. Finally, confirm the formatting process by clicking OK.

4]Repartition the SD card using DiskPart.

If your SD card has bad sectors, you are likely to run into the problem of not being able to format the SD card. If this scenario is applicable, you should be able to resolve the issue by repartitioning the disk. To do this, you can use the Windows command line utility DiskPart. It will clean up the SD card and generate new partitions on it.

Here’s how you can repartition your SD card using DiskPart:

First, run a command prompt as an administrator, as we did in method (2).

Now enter the following commands in the order shown:

diskpart
list disk
select disk X

In the third command, X is the disk number of the SD card to be formatted.

Then enter the following commands and press Enter:

clean
create partition primary

After that, to select the partition you just created, enter the following command:

select partition 1

Then, to make the partition active, enter the following command:

active

Now you can format your SD card by entering the following command:

format fs=ntfs label=SDCard quick

Now you can assign a letter to the section so that it appears in File Explorer using the following command:

assign letter=h

Finally, exit the command prompt and see if the drive is active in explorer.

5]Please use a third party SD card formatting tool.

If nothing works, you can try a third party SD card formatting tool to format your SD card. It can let you format your SD card without any problem. You can try this free software called SD Memory Card Formatter… Just Download and install this software and run it on your PC. After that, format our SD card. Hopefully this will allow you to format your SD card without any problem.

How to format a damaged SD card?

To format your damaged SD card, you can try deleting the bad sectors present on the SD card. You can also use a third party tool that can format your damaged SD card.

That’s all!

Now read:

[ad_2]

Source link

windows789.com

LEAVE A REPLY

Please enter your comment!
Please enter your name here